[version]
signature="$Windows NT$"
Class=MultiPortSerial
ClassGuid={50906CB8-BA12-11D1-BF5D-0000F805F530}
provider=%MS%
Layoutfile= Layout.inf
DriverVer=07/01/2001,3.10.0.199
;----------------------------------------------------------------
; PCI Vendor ID and Device ID combo's for all recognizable cards
;----------------------------------------------------------------
[ControlFlags]
ExcludeFromSelect=  *           

[Manufacturer]
%DIGI%=DIGIWANLINKS

[DIGIWANLINKS]
;; Acceleport
%Acceleport2p.DeviceDesc%  = Acceleport2p,  PCI\VEN_114F&DEV_0040&SUBSYS_0042114F
%Acceleport4p.DeviceDesc%  = Acceleport4p,  PCI\VEN_114F&DEV_0040&SUBSYS_0043114F
%Acceleport8p.DeviceDesc%  = Acceleport8p,  PCI\VEN_114F&DEV_0040&SUBSYS_0044114F
%Acceleport16p.DeviceDesc% = Acceleport16p, PCI\VEN_114F&DEV_0040&SUBSYS_0045114F

[Sys.CopyFiles]
digidxb.sys					; DStreams Driver (Prime, Sync2000, Houston, London, Chaska)
bioprime.bin				; Prime BIOS
fepprime.bin				; Prime Firmware
fepdense.bin				; Houston, London, Chaska Firmware
fepherc.bin					; AcceleportXp Firmware
digiisdn.sys				; Isdn (Prime, Houston, London)
digiasyn.sys				; Async (Houston, London, Chaska)
[Dll.CopyFiles]
;DigiInf.dll				; already installed as part of coinstaller
DigiFwrk.dll				; GUI Framework
DigiView.exe				; Diagnostic programs
DigiHLC.dll					; Prime, Houston, London, Chaska
DigiDBP.dll					; Prime, Houston, London, Chaska
DigiIsdn.dll				; ISDN GUI (Prime, Houston, London)
DigiAsyn.dll				; Async GUI (Houston, London, Chaska)
DigiRas.chm					; to be included later
DigiView.chm				; Diagnostics Help

[Help.CopyFiles]
DigiRas.chm					; to be included later
DigiView.chm				; Diagnostics Help

;**************************************************************************************
; Destination Directories - common to all adapters
;**************************************************************************************

[DestinationDirs]
DefaultDestDir=11
Sys.CopyFiles       = 12 ; Windows Drivers Directory
Dll.CopyFiles       = 11 ; Windows System Directory
Help.CopyFiles		= 18 ; Windows Help Directory

;****************************************************************************
; Adapter Install Sections
;****************************************************************************

[Acceleport2p.NT]
AddReg          = Dxb.staticparams.reg, Common.staticparams.reg, Acceleport2p.Adapter.reg
DelReg          = WanLinks.StaleParams.reg
CopyFiles = Sys.CopyFiles, Dll.CopyFiles, Help.CopyFiles
DigiCopyINF = netdgdxb.inf,digimps.inf,digiisdn.inf,DigiAsyn.inf,MdmDgDen.inf

[Acceleport4p.NT]
AddReg          = Dxb.staticparams.reg, Common.staticparams.reg, Acceleport4p.Adapter.reg
DelReg          = WanLinks.StaleParams.reg
CopyFiles = Sys.CopyFiles, Dll.CopyFiles, Help.CopyFiles
DigiCopyINF = netdgdxb.inf,digimps.inf,digiisdn.inf,DigiAsyn.inf,MdmDgDen.inf

[Acceleport8p.NT]
AddReg          = Dxb.staticparams.reg, Common.staticparams.reg, Acceleport8p.Adapter.reg
DelReg          = WanLinks.StaleParams.reg
CopyFiles = Sys.CopyFiles, Dll.CopyFiles, Help.CopyFiles
DigiCopyINF = netdgdxb.inf,digimps.inf,digiisdn.inf,DigiAsyn.inf,MdmDgDen.inf

[Acceleport16p.NT]
AddReg          = Dxb.staticparams.reg, Common.staticparams.reg, Acceleport16p.Adapter.reg
DelReg          = WanLinks.StaleParams.reg
CopyFiles = Sys.CopyFiles, Dll.CopyFiles, Help.CopyFiles
DigiCopyINF = netdgdxb.inf,digimps.inf,digiisdn.inf,DigiAsyn.inf,MdmDgDen.inf

;****************************************************************************
; WanLinks Adapter Services Sections
;****************************************************************************

[Acceleport2p.NT.Services]
AddService = DIGIDXB, 2, Dxb.AddService, Dxb.AddEventLog

[Acceleport4p.NT.Services]
AddService = DIGIDXB, 2, Dxb.AddService, Dxb.AddEventLog

[Acceleport8p.NT.Services]
AddService = DIGIDXB, 2, Dxb.AddService, Dxb.AddEventLog

[Acceleport16p.NT.Services]
AddService = DIGIDXB, 2, Dxb.AddService, Dxb.AddEventLog

;****************************************************************************
; WanLinks Adapter CoInstaller Sections
;****************************************************************************

[Acceleport2p.NT.CoInstallers]
CopyFiles = @DigiInf.dll
AddReg=Common.CoInstaller_AddReg

[Acceleport4p.NT.CoInstallers]
CopyFiles = @DigiInf.dll
AddReg=Common.CoInstaller_AddReg

[Acceleport8p.NT.CoInstallers]
CopyFiles = @DigiInf.dll
AddReg=Common.CoInstaller_AddReg

[Acceleport16p.NT.CoInstallers]
CopyFiles = @DigiInf.dll
AddReg=Common.CoInstaller_AddReg

;****************************************************************************
; DStreams Driver Specific
;****************************************************************************

[Dxb.AddService]
DisplayName     = %DIGIDXB.DispName%
ServiceType     = 1 ; SERVICE_KERNEL_DRIVER
StartType       = 1 ; SERVICE_SYSTEM_START
ErrorControl    = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary   = %12%\DIGIDXB.SYS
LoadOrderGroup  = Extended base

;****************************************************************************
; Common Sections
;****************************************************************************

[Common.CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000,"DigiInf.dll,DigiDxbCoInstaller"

[Dxb.AddEventLog]
AddReg=Dxb.AddEventLog.reg

[Dxb.AddEventLog.reg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\digidxb.sys"
HKR,,TypesSupported,0x00010001,7

[Common.staticparams.reg]
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config, "Major", 0x00010001, 3
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config, "Minor", 0x00010001, 10
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config, "Build", 0x00010001, 199
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config, "Date", 0x00000000, 04/13/2001
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\AdapterMap, "AccelePort2000", 0x00000000, DigiHLC.dll
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\LineMap, LineAccelePort2000, 0x00000000, DigiHLC.dll
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\ProtocolMap, "SERIAL", 0x00000000, DigiHLC.dll
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\ServiceMap, "ASYN", 0x00000000, DigiAsyn.dll
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\PortMap, "StdCom", 0x00000000, DigiAsyn.dll
HKR, "Parameters","Spoof",0x00010001,1

;**************************************************************************************
; Adapter specific stuff
;**************************************************************************************

; Dxb WanLinks Adapter Static Params

[Dxb.staticparams.reg]
HKR, , "ProductName", ,"DigiDxb"
; Early versions of the inf wrote this, the prop page is handled by the coinstaller now

[WanLinks.StaleParams.reg]
HKR, , EnumPropPages32
;
; AcceleportXp
;
[Acceleport2p.Adapter.reg]
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort2r2000", "AskMultiLines", 0x00010001, 0
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort2r2000", "MaxPorts", 0x00010001, 2
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort2r2000", "MaxLogicalChannelsPerLine", 0x00010001, 1
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort2r2000", "ProtocolsAllowed", 0x00010000, "SERIAL"
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort2r2000"\"SERIAL", "MaxPorts", 0x00010001, 2
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort2r2000"\"SERIAL", "ServicesAllowed", 0x00010000, "ASYN"
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort2r2000"\"SERIAL"\"ASYN", "MaxPorts", 0x00010001, 1
HKR, "Parameters", "Option",0x00000000,"AccelePort2000"
HKR, "Parameters", "Identity",0x00000000,"DigiAccelePort2r2000"
HKR, "Parameters", "NumberOfLines",0x00010001,2
HKR, "Parameters", "FepImagePath",0x00000000,"FepHerc.Bin"
HKR, "Parameters", "HasWizard", 0x00010001, 0

[Acceleport4p.Adapter.reg]
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort4r2000", "AskMultiLines", 0x00010001, 0
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort4r2000", "MaxPorts", 0x00010001, 4
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort4r2000", "MaxLogicalChannelsPerLine", 0x00010001, 1
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort4r2000", "ProtocolsAllowed", 0x00010000, "SERIAL"
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort4r2000"\"SERIAL", "MaxPorts", 0x00010001, 4
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort4r2000"\"SERIAL", "ServicesAllowed", 0x00010000, "ASYN"
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort4r2000"\"SERIAL"\"ASYN", "MaxPorts", 0x00010001, 1
HKR, "Parameters", "Option",0x00000000,"AccelePort2000"
HKR, "Parameters", "Identity",0x00000000,"DigiAccelePort4r2000"
HKR, "Parameters", "NumberOfLines",0x00010001,4
HKR, "Parameters", "FepImagePath",0x00000000,"FepHerc.Bin"
HKR, "Parameters", "HasWizard", 0x00010001, 0

[Acceleport8p.Adapter.reg]
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort8r2000", "AskMultiLines", 0x00010001, 0
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort8r2000", "MaxPorts", 0x00010001, 8
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort8r2000", "MaxLogicalChannelsPerLine", 0x00010001, 1
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort8r2000", "ProtocolsAllowed", 0x00010000, "SERIAL"
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort8r2000"\"SERIAL", "MaxPorts", 0x00010001, 8
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort8r2000"\"SERIAL", "ServicesAllowed", 0x00010000, "ASYN"
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort8r2000"\"SERIAL"\"ASYN", "MaxPorts", 0x00010001, 1
HKR, "Parameters", "Option",0x00000000,"AccelePort2000"
HKR, "Parameters", "Identity",0x00000000,"DigiAccelePort8r2000"
HKR, "Parameters", "NumberOfLines",0x00010001,8
HKR, "Parameters", "FepImagePath",0x00000000,"FepHerc.Bin"
HKR, "Parameters", "HasWizard", 0x00010001, 0

[Acceleport16p.Adapter.reg]
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort16r2000", "AskMultiLines", 0x00010001, 0
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort16r2000", "MaxPorts", 0x00010001, 16
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort16r2000", "MaxLogicalChannelsPerLine", 0x00010001, 1
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort16r2000", "ProtocolsAllowed", 0x00010000, "SERIAL"
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort16r2000"\"SERIAL", "MaxPorts", 0x00010001, 16
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort16r2000"\"SERIAL", "ServicesAllowed", 0x00010000, "ASYN"
HKLM, SOFTWARE\Digi\WAN Links\CurrentVersion\Config\"DigiAccelePort16r2000"\"SERIAL"\"ASYN", "MaxPorts", 0x00010001, 1
HKR, "Parameters", "Option",0x00000000,"AccelePort2000"
HKR, "Parameters", "Identity",0x00000000,"DigiAccelePort16r2000"
HKR, "Parameters", "NumberOfLines",0x00010001,16
HKR, "Parameters", "FepImagePath",0x00000000,"FepHerc.Bin"
HKR, "Parameters", "HasWizard", 0x00010001, 0

;**************************************************************************************
; Localizable Strings
;**************************************************************************************

[strings]
;BEGIN ENG - US English Strings
MS= "Microsoft"
DIGI="Digi International, Inc."
DIGIDXB.DispName = "Digi Dxb Adapter Driver"
Acceleport2p.DeviceDesc   = "Digi AccelePort 2p PCI Adapter"
;Acceleport2p.HelpText     = "This adapter provides 2 COM ports"
Acceleport4p.DeviceDesc   = "Digi AccelePort 4p PCI Adapter"
;Acceleport4p.HelpText     = "This adapter provides 4 COM ports"
Acceleport8p.DeviceDesc   = "Digi AccelePort 8p PCI Adapter"
;Acceleport8p.HelpText     = "This adapter provides 8 COM ports"
Acceleport16p.DeviceDesc  = "Digi AccelePort 16p PCI Adapter"
;Acceleport16p.HelpText    = "This adapter provides 16 COM ports"
;END ENG - US English Strings