; PmxScan.INF  -- Windows Still Image Setup File for the DDK
; Copyright (c) 1997 Microsoft Corporation

; Leave thse lines as they are
[Version]
Signature="$CHICAGO$"
Class=Image
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
Provider=%Msft%
LayoutFile=layout.inf, layout1.inf

[Manufacturer]
%Mfg%=Models

[Models]
; Replace PnPIDINformation with the hardware ID generated by your
; device for PnP identification
%ProductDesc%    = Samp, USB\VID_0461&PID_0364
%ProductDesc%1  = Samp, USB\VID_0458&PID_2001
%ProductDesc%2  = Samp, USB\VID_04A7&PID_0211
%ProductDesc%3  = Samp, USB\VID_04A7&PID_0221
%ProductDesc%4  = Samp, USB\VID_04A7&PID_0231
%ProductDesc%5  = Samp, USB\VID_0461&PID_0340
%ProductDesc%6  = Samp, USB\VID_0461&PID_0360
%ProductDesc%7  = Samp, USB\VID_04B3&PID_7512
%ProductDesc%8  = Samp, USB\VID_0461&PID_0363

[Uninstall.PreSetupCommand]
%10%\Twain_32\%TwainDir%\DelINF.EXE VID_0461&PID_0364
%10%\Twain_32\%TwainDir%\DelINF.EXE VID_0458&PID_2001
%10%\Twain_32\%TwainDir%\DelINF.EXE VID_04A7&PID_0211
%10%\Twain_32\%TwainDir%\DelINF.EXE VID_04A7&PID_0221
%10%\Twain_32\%TwainDir%\DelINF.EXE VID_04A7&PID_0231
%10%\Twain_32\%TwainDir%\DelINF.EXE VID_0461&PID_0340
%10%\Twain_32\%TwainDir%\DelINF.EXE VID_0461&PID_0360
%10%\Twain_32\%TwainDir%\DelINF.EXE VID_04B3&PID_7512
%10%\Twain_32\%TwainDir%\DelINF.EXE VID_0461&PID_0363

[ControlFlags]
; remove comment from this line for PnP devices
; ExcludeFromSelect.WIN=*
ExcludeFromSelect=*

[SourceDisksNames]
2=%ProductDesc%,,,

[SourceDisksFiles]
pmxusb.cpl=2
usbscan.sys=2
pmxsca95.sys=2
pmxsca98.sys=2
CONSTANT.INI=2
Config.dat=2
E1_USB.INI=2
E1_EPP.INI=2
HARDWARE.INI=2
ImgProc.dll=2
LTDIS90n.dll=2
ltfil90n.DLL=2
ltimg90n.dll=2
ltkrn90n.dll=2
LUT.PLG=2
PMXUSD.DLL=2
PROTOCOL.DS=2
Readme.txt=2
prdirect.dll=2
UI3RD_32.DLL=2
VICEO.DLL=2
gl.dll=2
Twunk_16.exe=2
Twunk_32.exe=2
APackENG.DLL=2
W95Inf16.DLL=2
W95Inf32.DLL=2
DrvEpp.dll=2
Vpmx2d.dll=2
Ppsio2.ini=2
Ppsio2.sys=2
DelINF.EXE=2

; Depend on language
TW_Eng.HLP=2
ScaENG95.inf=2
Tw_Eng.dll=2
Tw32_Eng.dll=2
UI32_Eng.DLL=2
S32_Eng.dll=2
TW_ENG.REG=2

[DestinationDirs]
DefaultDestDir=11               ; LDID_SYS that is, \windows\system
CopyFiles.Sys32.NTX86=12				; system32\drivers
CopyFiles.Sys32.WIN=11
CopyFiles.Inf=17
TwainDriver.CopyFiles=10,twain_32\%TwainDir%
Uninstall.ExtraFiles=10,twain_32\%TwainDir%
TwainTrunk.CopyFiles=10
CopyFiles.USB=10,twain_32\%TwainDir%
CopyFiles.EPP=10,twain_32\%TwainDir%
CopyFiles.EPP.WIN=10,twain_32\%TwainDir%
CopyFiles.EPP.NTX86=12

[Samp]
; USB 95/98
;SubClass=StillImage
;DeviceType=2
;DeviceSubType=0x1
;Capabilities=2
;PropertyPages="USBScan.cpl,EnumStiPropPages"
;ICMProfiles="sRGB Color Space Profile.icm"
DeviceData=Samp.DeviceData
AddReg=Uninstall.Add.Reg.USB,Samp.AddReg.Win
;Events=SampUSD.Events
CopyFiles=Samp.CopyFiles,CopyFiles.Sys32.Win,TwainDriver.CopyFiles,CopyFiles.USB,TwainTrunk.CopyFiles,CopyFiles.Inf,AdvPack
Uninstall=DefaultUnInstall.USB
RunPostSetupCommands = PostSetupCommandsSection_Win
UpdateInis=Update.Hardware.INI

[Samp.NTX86]
; USB 2000
;SubClass=StillImage
;DeviceType=2
;DeviceSubType=0x1
;Capabilities=2
;PropertyPages="USBScan.cpl,EnumStiPropPages"
;ICMProfiles="sRGB Color Space Profile.icm"
DeviceData=Samp.DeviceData
AddReg=Uninstall.Add.Reg.USB.NTX86,Samp.AddReg.NTX86,Samp.AddReg.STI
;Events=SampUSD.Events
CopyFiles=Samp.CopyFiles,CopyFiles.Sys32.NTX86,TwainDriver.CopyFiles,CopyFiles.USB,TwainTrunk.CopyFiles,CopyFiles.Inf,AdvPack
Uninstall=DefaultUnInstall.USB.NTX86
RunPostSetupCommands = PostSetupCommandsSection_NTX86
UpdateInis=Update.Hardware.INI

[PostSetupCommandsSection_Win]
RegEdit.exe /s %10%\twain_32\%TwainDir%\TWAIN.REG


[PostSetupCommandsSection_NTX86]
RegEdit.exe /s %10%\twain_32\%TwainDir%\TWAIN.REG


[DefaultInstall]
; EPP 95/98
AddReg=Uninstall.Add.Reg.EPP
CopyFiles=Samp.CopyFiles,CopyFiles.EPP,CopyFiles.EPP.Win,TwainDriver.CopyFiles,TwainTrunk.CopyFiles,CopyFiles.Inf,AdvPack
Uninstall=DefaultUnInstall.EPP
RunPostSetupCommands = PostSetupCommandsSection_Win
UpdateInis=Update.Hardware.INI

[DefaultInstall.NTX86]
; EPP NT4/2000
AddReg=Uninstall.Add.Reg.EPP.NTX86,Samp.AddReg.NTX86.EPP
CopyFiles=Samp.CopyFiles,CopyFiles.EPP,CopyFiles.EPP.NTX86,TwainDriver.CopyFiles,TwainTrunk.CopyFiles,CopyFiles.Inf,AdvPack
Uninstall=DefaultUnInstall.EPP.NTX86
RunPostSetupCommands = PostSetupCommandsSection_NTX86
UpdateInis=Update.Hardware.INI

[Samp.DeviceData]
; Ancillary data to be associated with this device.
; TwainDS, ICMProfile, and ISISDriverName are known identifiers
TwainDS=%Product%
; ISISDriverName="Samp.pxw"
; You can also attach additional information to any device.
; SpecialInfo="My very special information"


[Samp.NTX86.Services]
AddService = pmxscan, 0x00000002, PmxScan.AddService

[SampUSD.Events]
ButtonPress="%ButtonPress%",{EF2F45C1-E038-11D1-A415-0080C85429A2},Sti Event
ButtonDown0=%String8%,{F55B91C1-9471-11D2-953E-0040052FC4F9},*
ButtonDown1=%String9%,{F55B91C2-9471-11D2-953E-0040052FC4F9},*
ButtonDown2=%String10%,{F55B91C3-9471-11D2-953E-0040052FC4F9},*
ButtonDown3=%String11%,{F55B91C4-9471-11D2-953E-0040052FC4F9},*

[Samp.AddReg.Win]
; This all depends on which kernel services you need
HKR,,DeviceType,1,1
HKR,,DevLoader,,*NTKERN
; list system driver here if required such as this line for SCSI devices using MS SCSISCAN
HKR,,NTMPDriver,,"pmxscan.sys"

[Samp.AddReg.NTX86]
; This all depends on which kernel services you need
HKR,,DeviceType,1,1
HKR,,DevLoader,,*NTKERN
; list system driver here if required such as this line for SCSI devices using MS SCSISCAN
HKR,,NTMPDriver,,"usbscan.sys"

[Samp.AddReg.NTX86.EPP]
; This all depends on which kernel services you need
"HKLM","System\CurrentControlSet\Services\ppsio2"
"HKLM","System\CurrentControlSet\Services\ppsio2",DisplayName,,"PPDevice"
"HKLM","System\CurrentControlSet\Services\ppsio2",Group,,"Extended base"
"HKLM","System\CurrentControlSet\Services\ppsio2",Type,0x00010001,1
"HKLM","System\CurrentControlSet\Services\ppsio2",Start,0x00010001,2
"HKLM","System\CurrentControlSet\Services\ppsio2",ErrorControl,0x00010001,1


[Samp.AddReg.STI]
; Replace the GUID in these four lines with a new GUID from guidgen
; Also change it in Sampusd.h
HKR,,USDClass,,"{C3A80960-28B1-11D1-ACAD-00A02438AD48}"
;Change the dll name at the end of this line
HKCR,CLSID\{C3A80960-28B1-11D1-ACAD-00A02438AD48},,,"USB Scanner STI USD"
HKCR,CLSID\{C3A80960-28B1-11D1-ACAD-00A02438AD48}\InProcServer32,,,%10%\twain_32\%TwainDir%\pmxusd.dll
HKCR,CLSID\{C3A80960-28B1-11D1-ACAD-00A02438AD48}\InProcServer32,ThreadingModel,,"Apartment"

[Samp.CopyFiles]
pmxusb.cpl

[CopyFiles.Sys32.NTX86]
; Still Image Kernel Driver
usbscan.sys

[CopyFiles.Sys32.Win]
pmxscan.sys,PmxSca95.sys

[TwainDriver.CopyFiles]
; %windir%\twain_32\%TwainDir%
CONSTANT.INI
Config.dat
HARDWARE.INI
ImgProc.dll
LTDIS90n.dll
ltfil90n.DLL
ltimg90n.dll
ltkrn90n.dll
LUT.PLG
PMXUSD.DLL
PROTOCOL.DS
UI3RD_32.DLL
VICEO.DLL
gl.dll
Readme.txt
prdirect.dll
DelINF.EXE

; Depend on language
set32.dll,S32_Eng.DLL
TWAIN.HLP,TW_ENG.HLP
UI32.DLL,UI32_Eng.DLL
TWAIN.REG,TW_ENG.REG

[CopyFiles.USB]
E1.INI,E1_USB.ini

[CopyFiles.EPP]
E1.INI,E1_EPP.ini
DrvEpp.DLL

[CopyFiles.EPP.NTX86]
Ppsio2.ini
Ppsio2.sys

[CopyFiles.EPP.WIN]
Vpmx2d.vxd

[AdvPack]
AdvPack.DLL,APackENG.DLL,,16
W95Inf16.DLL,,,16
W95Inf32.DLL,,,16


[TwainTrunk.CopyFiles]
Twunk_16.exe,,,16
Twunk_32.exe,,,16
; Depend on language
Twain.dll,Tw_Eng.dll,,16
Twain_32.dll,Tw32_Eng.dll,,16


[CopyFiles.Inf]
; Depend on language
PmxScan.inf,ScaENG95.inf

[PmxScan.AddService]
DisplayName    = %pmxscan.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\usbscan.sys
LoadOrderGroup = Base

[DefaultUnInstall.USB.NTX86]
;USB Uninstall => Win2000
DelFiles=Samp.CopyFiles,TwainDriver.CopyFiles,CopyFiles.USB,Uninstall.ExtraFiles
DelReg=Uninstall.Add.Reg.USB.NTX86
BeginPrompt=BeginUPromptSection
EndPrompt=EndUPromptSection
DelDirs = RemoveDirsSection
RunPostSetupCommands = PostSetupCommandSection_NTX86
RunPreSetupCommands = Uninstall.PreSetupCommand

[DefaultUnInstall.USB]
;USB Uninstall => 95/98
DelFiles=Samp.CopyFiles,TwainDriver.CopyFiles,CopyFiles.USB,Uninstall.ExtraFiles
DelReg=Uninstall.Add.Reg.USB
BeginPrompt=BeginUPromptSection
EndPrompt=EndUPromptSection
DelDirs = RemoveDirsSection
RunPostSetupCommands = PostSetupCommandSection
RunPreSetupCommands = Uninstall.PreSetupCommand

[DefaultUnInstall.EPP.NTX86]
;EPP Uninstall => Win2000
DelFiles=Samp.CopyFiles,TwainDriver.CopyFiles,CopyFiles.EPP,CopyFiles.EPP.NTX86,Uninstall.ExtraFiles
DelReg=Uninstall.Add.Reg.EPP.NTX86
BeginPrompt=BeginUPromptSection
EndPrompt=EndUPromptSection
DelDirs = RemoveDirsSection
RunPostSetupCommands = PostSetupCommandSection_NTX86

[DefaultUnInstall.EPP]
;EPP Uninstall => 95/98
DelFiles=Samp.CopyFiles,TwainDriver.CopyFiles,CopyFiles.EPP,CopyFiles.EPP.Win,Uninstall.ExtraFiles
DelReg=Uninstall.Add.Reg.EPP
BeginPrompt=BeginUPromptSection
EndPrompt=EndUPromptSection
DelDirs = RemoveDirsSection
RunPostSetupCommands = PostSetupCommandSection


[PostSetupCommandSection]
RunDll32 Advpack.dll,LaunchINFSection %17%\OneTouch.INF,DefaultUnInstall

[PostSetupCommandSection_NTX86]
RunDll32 Advpack.dll,LaunchINFSection %17%\OneTouch.INF,DefaultUnInstall.NTX86

[Uninstall.ExtraFiles]
Twain.GID
Preview.bmp
PRDirect.log

[BeginUPromptSection]
Prompt=%BeginUPromptPrompt%
ButtonType=YESNO
Title=%BeginUPromptTitle%

[EndUPromptSection]
Prompt=%EndUPromptPrompt%

[RemoveDirsSection]
%10%\Twain_32\%TwainDir%


[Uninstall.Add.Reg.USB]
HKLM,%Uninstall%%Product%
HKLM,%Uninstall%%Product%,"DisplayName",,"%Product%"
HKLM,%Uninstall%%Product%,"UninstallString",,"RunDll32 advpack.dll,LaunchINFSection %17%\PmxScan.INF,DefaultUnInstall.USB"

[Uninstall.Add.Reg.USB.NTX86]
HKLM,%Uninstall%%Product%
HKLM,%Uninstall%%Product%,"DisplayName",,"%Product%"
HKLM,%Uninstall%%Product%,"UninstallString",,"RunDll32 advpack.dll,LaunchINFSection %17%\PmxScan.INF,DefaultUnInstall.USB.NTX86"

[Uninstall.Add.Reg.EPP]
HKLM,%Uninstall%%Product%
HKLM,%Uninstall%%Product%,"DisplayName",,"%Product%"
HKLM,%Uninstall%%Product%,"UninstallString",,"RunDll32 advpack.dll,LaunchINFSection %17%\PmxScan.INF,DefaultUnInstall.EPP"

[Uninstall.Add.Reg.EPP.NTX86]
HKLM,%Uninstall%%Product%
HKLM,%Uninstall%%Product%,"DisplayName",,"%Product%"
HKLM,%Uninstall%%Product%,"UninstallString",,"RunDll32 advpack.dll,LaunchINFSection %17%\PmxScan.INF,DefaultUnInstall.EPP.NTX86"

[Update.Hardware.INI]
;%10%\Twain_32\%TwainDir%\Hardware.INI, "Identity",,"ProductName=%Product%"    	 ,0
;%10%\Twain_32\%TwainDir%\Hardware.INI, "Identity",,"ProductName_16=%Product%"  	 ,0
;%10%\Twain_32\%TwainDir%\Hardware.INI, "Option"  ,,"Caption=%TwainUIName%"       ,0

[Strings]
Uninstall="Software\Microsoft\Windows\CurrentVersion\Uninstall\"
ButtonPress="Launch Button Push"
pmxscan.SvcDesc= "USB Flatbed Scanner Driver"
String8="Scan Button"
String9="Copy/Print Button"
String10="Fax Button"
String11="Custom Button"
Msft="Primax"
Mfg="Primax"
ProductDesc="FlatBed Scanner(English Win95)"

Product="FlatBed Scanner"
;TwainUIName="FlatBed Scanner" 
TwainDir="FlatBed"
BeginUPromptPrompt="Are you sure you want to remove FlatBed Scanner?"
BeginUPromptTitle="FlatBed Scanner Uninstall"
EndUPromptPrompt="FlatBed Scanner was successfully removed from your computer."